KIWI KSI-650 Portable Steam Wrinkle Remover 1200W - Fast Heat

CONTINUOUS POWERFUL STEAM REMOVES WRINKLES STAINLESS STEEL STEAM OUTLET LOCKED BUTTON FOR CONTINUOUS OPERATION ANTI-STATIC HEAD WITH DUST CLEANING BRUSH MEASURING CUP INCLUDED LIGHTWEIGHT AND COMPACT DESIGN FOR EASY STORAGE IDEAL FOR REMOVING WRINKLES FROM HANGING CLOTHES OR CURTAINS HOT STEAM ELIMINATES GERMS AND BACTERIA, PROVIDING DISINFECTION TEMPERATURE NEAR THE STEAM OUTLET IS 90-110°C AND IS SUITABLE FOR COTTON AND FABRICS. HOWEVER, THIS TEMPERATURE IS TOO HIGH FOR WOOL, SILK AND LEATHER. THEREFORE, IT IS STRONGLY RECOMMENDED TO PLACE A CLOTH PIECE OVER THE GARMENTS YOU WILL REMOVE WRINKLES FROM, OR THE MINIMUM DISTANCE FROM THE STEAM OUTLET TO THE GARMENTS SHOULD BE 1 CM. OTHERWISE, THERE IS A HIGH RISK OF DAMAGE TO THE GARMENTS. DO NOT USE THE DEVICE ON CLOTHES YOU ARE WEARING. ---------- BEFORE FIRST USE ----------- 1. MAKE SURE THE DEVICE PLUG IS DISCONNECTED FROM THE POWER SOURCE. 2. CAREFULLY REMOVE THE WATER TANK CAP. 3. FILL THE WATER TANK USING A MEASURING CUP OR SIMILAR TOOL. 4. FILL THE WATER TANK WITH ROOM TEMPERATURE WATER TO THE DESIRED LEVEL. 5. MAKE SURE THE WATER TANK CAP IS TIGHTLY SECURED. ---------- USAGE ---------- IT IS RECOMMENDED TO USE THE UNIT AT 5-40°C TEMPERATURE AND RELATIVE HUMIDITY LOWER THAN 9680 BN. REMOVE THE TOP CAP OF THE WATER RESERVOIR AND FILL THE RESERVOIR WITH CLEAN WATER NOT EXCEEDING 40°C, THEN REPLACE THE CAP. PLUG THE POWER CORD INTO THE OUTLET AND TURN ON THE UNIT BY TURNING THE CONTROL BUTTON TO THE RIGHT. THE DEVICE INDICATOR LIGHT WILL TURN ON AND START OPERATING. THE CONTROL BUTTON CAN BE USED TO CONTROL MOISTURE OUTPUT. NOTE: NEVER OPERATE THE UNIT WITHOUT WATER IN THE TANK. ----------- CAUTION ---------- 1. AFTER EACH USE, ALWAYS LET THE UNIT COOL FOR 15 MINUTES. DO NOT REFILL THE RESERVOIR WHILE THE BOILER IS STILL HOT, AS THIS MAY CAUSE HOT WATER TO SPILL AND STEAM TO ESCAPE FROM THE FILLER OPENING. 2. BE VERY CAREFUL WHEN EMPTYING RESIDUAL WATER FROM THE WATER RESERVOIR. 3. STOP FILLING WATER WHEN YOU REACH THE MAX LINE. 4. IT IS RECOMMENDED TO USE DISTILLED OR DEMINERALIZED WATER TO EXTEND THE LIFE OF THE STEAM WRINKLE REMOVER. 5. USE WATER ONLY. DO NOT USE DETERGENT OR OTHER CHEMICALS. ---------- CLEANING AND MAINTENANCE ----------- DO NOT SUBMERGE THE DEVICE IN WATER. USE A DRY AND CLEAN CLOTH TO DRY THE DEVICE. NO SPECIAL CLEANING AGENT IS NEEDED. MAKE SURE THE MAIN BODY IS DRY BEFORE STORAGE OR PACKAGING.